+ Comms Bends
+ Comms Fittings
+ Conduit Accessories
+ HD Bends
+ HD Fittings
+ LD Bends
+ LD Fittings
+ NBN Bends
+ Pitbush
+ Safety Products
+ Telstra Bends
+ Underground Extras


Whilst every precaution is taken to ensure the information herein is correct, Rainbow Electrical Bends accepts no liability whatsoever for errors or omissions. In the interest of continuous improvement, Rainbow Electrical Bends reserves the right to change the specifications or design of any of its products without prior notice.



Keeping Rainbow Bends rolling . . .

Standard PVC sweep bends and accessories for underground Electrical and Communications use are always in stock for immediate delivery from our Nerang factory. Even special orders usually take only a day or two longer to satisfy, because everything is made right here, in Queensland.

All of the sweep bends sold by Rainbow Electrical Bends are hand formed with attention to quality. They are made from conduit produced in Australia to AS/NZS 2053 standards. Every bend is shaped on jigs with care and efficiency by specially trained staff - all of whom are proud to be part of a very special operation.

They know that the sweep bends they make are as essential to long runs of conduit as nuts are to bolts. Rarely can you have one without the other.

Because of this, they take pains to ensure top quality and reliability. Every bend is checked at least twice before dispatch, with attention to alignment, shape and connectivity

Gary and Martin - keeping the factory rolling

Owner, Ken Souter, (left) and staff member Matt Clarke, checking a load of recycled offcuts into the Rainbow Bends Nerang factory.

All of our PVC Sweep Bends and pipe fittings are manufactured in our Queensland factory. Products we supply include:
  • PVC bends of all standard sizes and angles
        - Orange PVC Electrical & White Communications
  • Couplings - Heavy Duty - Communications - Light Duty
  • Slip Couplings - Heavy Duty
        - Communications - Light Duty
  • Reducing couplings - Heavy Duty
        - Communications - Light Duty
  • Bellmouths - Heavy Duty - White Communications
  • Cable cover - 150mm 200mm 300mm
  • End caps all sizes
  • Warning Tape - Orange - Communications
  • Marking paint - PVC glue
  • Blowline - Telstra rope - Mega Rope (Green)




Important, please note: All of our prices
exclude GST and are ex-factory, plus freight.
We will source the best shipping
and advise cost when confirming order.
Ask for a quote for that larger, special job.
Call Amber Souter now on (07) 5502 2611 to order
or discuss your requirements. After hours: 0430 119 183

Large radius bends! Don't be frustrated when the odd (and we do mean odd) architect
specifies an extremely large radius bend to fit in with that whacky new building they have
designed? You no longer have any problems. Check out our Large Bends page

"Sunburnt" PVC conduit? We've been asked about conduit that has been stored in clients yards that has started to show discoloration, or "sunburn", so we checked out the facts. This is a common occurrance that has very little effect on the conduit and no effect at all once it is buried or painted. You will find all the facts on our sunburn query page

Current Specials:
Slippery Lube 1Litre
Witches Hat x 1

All PVC Sweep Bends and fittings manufactured by Rainbow Electrical Bends are hand made in Australia, from materials that are fully made in Australia to AS/NZS 2053 standards. Our main markets are in Queensland and NSW, and depending on freight costs we can compete for supply anywhere in Australia.

Subscribe to our mailing list

* indicates required
Email Format
Catalogue Application © Busyweb 2009